starred/luci-app-3ginfo-lite
1
0
Fork 0
mirror of https://github.com/4IceG/luci-app-3ginfo-lite.git synced 2026-04-25 19:35:53 +03:00
Code Issues 59 Projects Releases 5 Packages Wiki Activity

[GH-ISSUE #86] Fibocom modem -FM190 5G/4G modem Signals #68

New issue
Open
opened 2026-03-04 11:58:21 +03:00 by kerem · 10 comments
kerem commented 2026-03-04 11:58:21 +03:00
Owner
Copy link

Originally created by @ghost on GitHub (Jul 24, 2024).
Original GitHub issue: https://github.com/4IceG/luci-app-3ginfo-lite/issues/86

Hi Dear Sir IceG

After doing this command (advised by IceG)

root@OpenWrt:~# rm /usr/share/3ginfo-lite/modem/usb/2cb70104

root@OpenWrt:~# cp /usr/share/3ginfo-lite/modem/usb/0e8d7126 /usr/share/3ginfo-lite/modem/usb/2cb70104

When network connected to 4G only the signal appeared .
image

Note: its showing only one band 4G , where there are more than 4 bands 4G
image

After I switched the network to 5G NSA (4G+5G) .... The error came again .
image

Debug from 3ginfo

{
"conn_time":"0d, 01:12:18",
"conn_time_sec":"4338",
"conn_time_since":"20240724144007",
"rx":"2.9 GiB",
"tx":"301.3 MiB",
"modem":"Fibocom  FM190W-GL",
"mtemp":"",
"firmware":"99103.1000.00.01.06.10",
"cport":"/dev/ttyUSB1",
"protocol":"qmi",
"csq":"21",
"signal":"67",
"operator_name":"stc ksa",
"operator_mcc":"420",
"operator_mnc":"01",
"location":"Saudi Arabia",
"mode":"5G NSA |",
"registration":"1",
"simslot":"",
"imei":"351064272748410",
"imsi":"420012416985880",
"iccid":"8996601240169858806F",
"lac_dec":"65535",
"lac_hex":"FFFF",
"tac_dec":"",
"tac_hex":"-",
"tac_h":"4285",
"tac_d":"17029",
"cid_dec":"7155981",
"cid_hex":"6D310D",
"pci":"78
188",
"earfcn":"4FF
9D0E0",
"pband":"",
"s1band":"",
"s1pci":"",
"s1earfcn":"",
"s2band":"",
"s2pci":"",
"s2earfcn":"",
"s3band":"",
"s3pci":"",
"s3earfcn":"",
"s4band":"",
"s4pci":"",
"s4earfcn":"",
"rsrp":"",
"rsrq":"",
"rssi":"-71",
"sinr":""
}
+ RES=/usr/share/3ginfo-lite
+ /usr/share/3ginfo-lite/detect.sh
+ DEVICE=/dev/ttyUSB1
+ '[' -z /dev/ttyUSB1 ]
+ O=
+ '[' -e /usr/bin/sms_tool ]
+ sms_tool -D -d /dev/ttyUSB1 at 'AT+CPIN?;+CSQ;+COPS=3,0;+COPS?;+COPS=3,2;+COPS?;+CREG=2;+CREG?'
+ O='
+CPIN: READY

+CSQ: 21,99

+COPS: 0,0,"stc ksa",13

+COPS: 0,2,"42001",13

+CREG: 2,1,"FFFF","006D310D",13

OK
'
+ CONFIG=modemdefine
+ uci show modemdefine
+ grep -o '@modemdefine\[[0-9]*\]\.modem'
+ wc -l
+ xargs
+ MODEMZ=1
+ '[[' 1 ]]
+ uci -q get 'modemdefine.@general[0].main_network'
+ SEC=
+ '[[' 1 '=' 0 ]]
+ '[[' 1 '=' 1 ]]
+ uci -q get 'modemdefine.@modemdefine[0].network'
+ SEC=Modem
+ '[' -z Modem ]
+ CONN_TIME=-
+ RX=-
+ TX=-
+ ifstatus Modem
+ grep '"up": true'
+ NETUP='	"up": true,'
+ '[' -n '	"up": true,' ]
+ uci -q -P /var/state/ get network.Modem.connect_time
+ CT=
+ '[' -z ]
+ ifstatus Modem
+ awk '-F[:,]' '/uptime/ {print $2}'
+ xargs
+ CT=4338
+ '[' '!' -z 4338 ]
+ expr 4338 / 60 / 60 / 24
+ D=0
+ expr 4338 / 60 / 60 '%' 24
+ H=1
+ expr 4338 / 60 '%' 60
+ M=12
+ expr 4338 '%' 60
+ S=18
+ printf '%dd, %02d:%02d:%02d' 0 1 12 18
+ CONN_TIME='0d, 01:12:18'
+ date '+%s'
+ date '+%Y%m%d%H%M%S' -d @1721832007
+ CONN_TIME_SINCE=20240724144007
+ ifstatus Modem
+ awk '-F"' '/l3_device/ {print $4}'
+ IFACE=wwan0
+ '[' -n wwan0 ]
+ ifconfig wwan0
+ awk '-F[()]' '/bytes/ {printf "%s",$2}'
+ RX='2.9 GiB'
+ ifconfig wwan0
+ awk '-F[()]' '/bytes/ {printf "%s",$4}'
+ TX='301.3 MiB'
+ echo '
+CPIN: READY

+CSQ: 21,99

+COPS: 0,0,"stc ksa",13

+COPS: 0,2,"42001",13

+CREG: 2,1,"FFFF","006D310D",13

OK
'
+ awk '-F[, ]' '/^\+CSQ/ {print $2}'
+ CSQ=21
+ '[' x21 '=' x ]
+ '[' 21 -ge 0 -a 21 -le 31 ]
+ CSQ_PER=67
+ COPS=
+ COPS_MCC=
+ COPS_MNC=
+ echo '
+CPIN: READY

+CSQ: 21,99

+COPS: 0,0,"stc ksa",13

+COPS: 0,2,"42001",13

+CREG: 2,1,"FFFF","006D310D",13

OK
'
+ awk '-F["]' '/^\+COPS:\s*.,2/ {print $2}'
+ COPS_NUM=42001
+ '[' -n 42001 ]
+ COPS_MCC=420
+ COPS_MNC=01
+ echo '
+CPIN: READY

+CSQ: 21,99

+COPS: 0,0,"stc ksa",13

+COPS: 0,2,"42001",13

+CREG: 2,1,"FFFF","006D310D",13

OK
'
+ awk '-F["]' '/^\+COPS:\s*.,0/ {print $2}'
+ TCOPS='stc ksa'
+ '[' 'xstc ksa' '!=' x ]
+ COPS='stc ksa'
+ '[' -z 'stc ksa' ]
+ '[' -z 'stc ksa' ]
+ '[[' stc ksa '=~' ' ' ]]
sh: ksa: unknown operand
+ sms_tool -d /dev/ttyUSB1 at 'AT+COPS?'
+ sed -n 2p
+ cut -d '"' -f2
+ tr -d '\r'
+ isp=42001
+ isp_num='420 01'
+ isp_numws=42001
+ '[[' stc ksa '=~' '^[0-9]+$' ]]
sh: ksa: unknown operand
+ LOCATIONFILE=/tmp/location
+ '[' -e /tmp/location ]
+ touch /tmp/location
+ cat /tmp/location
+ LOC='Saudi Arabia'
+ '[' -n 'Saudi Arabia' ]
+ cat /tmp/location
+ LOC='Saudi Arabia'
+ '[[' Saudi Arabia '==' - ]]
sh: Arabia: unknown operand
+ awk '-F[;]' '/^42001;/ {print $2}' /usr/share/3ginfo-lite/mccmnc.dat
+ LOC='Saudi Arabia'
+ '[' -n 'Saudi Arabia' ]
+ echo 'Saudi Arabia'
+ echo '
+CPIN: READY

+CSQ: 21,99

+COPS: 0,0,"stc ksa",13

+COPS: 0,2,"42001",13

+CREG: 2,1,"FFFF","006D310D",13

OK
'
+ awk '-F[, ]' '/^\+CPIN:/ {print $0;exit}'
+ xargs
+ T='+CPIN: READY'
+ '[' -n '+CPIN: READY' ]
+ '[' '+CPIN: READY' '=' '+CPIN: READY' ]
+ echo '
+CPIN: READY

+CSQ: 21,99

+COPS: 0,0,"stc ksa",13

+COPS: 0,2,"42001",13

+CREG: 2,1,"FFFF","006D310D",13

OK
'
+ awk '-F[, ]' '/^\+CME ERROR:/ {print $0;exit}'
+ T=
+ '[' -n  ]
+ echo '
+CPIN: READY

+CSQ: 21,99

+COPS: 0,0,"stc ksa",13

+COPS: 0,2,"42001",13

+CREG: 2,1,"FFFF","006D310D",13

OK
'
+ awk '-F[,]' '/^\+CREG/ {gsub(/[[:space:]"]+/,"");printf "T=\"%d\";LAC_HEX=\"%X\";CID_HEX=\"%X\";LAC_DEC=\"%d\";CID_DEC=\"%d\";MODE_NUM=\"%d\"", $2, "0x"$3, "0x"$4, "0x"$3, "0x"$4, $5}'
+ eval 'T="1";LAC_HEX="FFFF";CID_HEX="6D310D";LAC_DEC="65535";CID_DEC="7155981";MODE_NUM="13"'
+ T=1
+ LAC_HEX=FFFF
+ CID_HEX=6D310D
+ LAC_DEC=65535
+ CID_DEC=7155981
+ MODE_NUM=13
+ REG=1
+ '[' -z 13 ]
+ '[' x13 '=' x0 ]
+ MODE=-
+ sms_tool -d /dev/ttyUSB1 at at+cereg
+ OTX='
'
+ echo '
'
+ awk '-F[,]' '/^\+CEREG/ {printf "%s", toupper($3)}'+ 
sed 's/[^A-F0-9]//g'
+ TAC=
+ '[' x '!=' x ]
+ TAC=-
+ TAC_HEX=-
+ uci -q get '3ginfo.@3ginfo[0].device'
+ CONF_DEVICE=/dev/ttyUSB1
+ echo x/dev/ttyUSB1
+ grep -q 192.168.
+ '[' -e /usr/bin/sms_tool ]
+ REGOK=0
+ '[' x1 '=' x1 ]
+ REGOK=1
+ getdevicevendorproduct /dev/ttyUSB1
+ basename /dev/ttyUSB1
+ devname=ttyUSB1
+ readlink -f /sys/class/tty/ttyUSB1/device
+ devpath=/sys/devices/platform/soc/11200000.usb/usb2/2-1/2-1.1/2-1.1:1.1/ttyUSB1
+ T=/sys/devices/platform/soc/11200000.usb/usb2/2-1/2-1.1
+ cat /sys/devices/platform/soc/11200000.usb/usb2/2-1/2-1.1/idVendor
+ cat /sys/devices/platform/soc/11200000.usb/usb2/2-1/2-1.1/idProduct
+ echo usb/2cb70104
+ VIDPID=usb/2cb70104
+ '[' -e /usr/share/3ginfo-lite/modem/usb/2cb70104 ]
+ cat /tmp/sysinfo/board_name
+ . /usr/share/3ginfo-lite/modem/usb/2cb70104
+ sms_tool -d /dev/ttyUSB1 at 'AT+GTCCINFO?;+GTCAINFO?'
+ O='
+GTCCINFO: 
LTE-NR EN-DC service cell: 
1,4,420,01,4285,6D310D,4FF,78,103,75,2,71,71,16 
1,9,420,01,,,9D0E0,188,5078,100,67,84,84,64

+GTCAINFO: 
LTE PCC: 103,120,1279,75,2,1,1,1,71
NR PCC: 5078,392,643296,100,2,,1,3,84
LTE SCC1: 1,0,108,383,3700,50,0,1,1,6,6,56
LTE SCC2: 1,0,101,36,500,100,0,2,1,6,6,69
LTE SCC3: 1,0,140,68,38956,100,0,2,1,6,6,68
LTE SCC4: 1,0,140,68,39154,100,0,2,1,6,6,68


'
+ MODE='5G NSA |'
+ T_MODE=
+ echo '
+GTCCINFO: 
LTE-NR EN-DC service cell: 
1,4,420,01,4285,6D310D,4FF,78,103,75,2,71,71,16 
1,9,420,01,,,9D0E0,188,5078,100,67,84,84,64

+GTCAINFO: 
LTE PCC: 103,120,1279,75,2,1,1,1,71
NR PCC: 5078,392,643296,100,2,,1,3,84
LTE SCC1: 1,0,108,383,3700,50,0,1,1,6,6,56
LTE SCC2: 1,0,101,36,500,100,0,2,1,6,6,69
LTE SCC3: 1,0,140,68,38956,100,0,2,1,6,6,68
LTE SCC4: 1,0,140,68,39154,100,0,2,1,6,6,68


'
+ grep -A3 +GTCCINFO:
+ grep '1,[49],420'
+ T1='1,4,420,01,4285,6D310D,4FF,78,103,75,2,71,71,16 
1,9,420,01,,,9D0E0,188,5078,100,67,84,84,64
'
+ '[' -n '1,4,420,01,4285,6D310D,4FF,78,103,75,2,71,71,16 
1,9,420,01,,,9D0E0,188,5078,100,67,84,84,64
' ]
+ echo '1,4,420,01,4285,6D310D,4FF,78,103,75,2,71,71,16 
1,9,420,01,,,9D0E0,188,5078,100,67,84,84,64
'
+ awk -F, '{print $2}'
+ T_RAT='4
9'
+ echo '1,4,420,01,4285,6D310D,4FF,78,103,75,2,71,71,16 
1,9,420,01,,,9D0E0,188,5078,100,67,84,84,64
'
+ awk -F, '{print $5}'
+ T=4285
+ '[' -n 4285 ]
+ printf '%d' 0x4285
+ T_DEC=17029
+ T_HEX=4285
+ echo '1,4,420,01,4285,6D310D,4FF,78,103,75,2,71,71,16 
1,9,420,01,,,9D0E0,188,5078,100,67,84,84,64
'
+ awk -F, '{print $7}'
+ T='4FF
9D0E0'
+ '[' -n '4FF
9D0E0' ]
+ EARFCN='4FF
9D0E0'
+ echo '1,4,420,01,4285,6D310D,4FF,78,103,75,2,71,71,16 
1,9,420,01,,,9D0E0,188,5078,100,67,84,84,64
'
+ awk -F, '{print $8}'
+ T='78
188'
+ '[' -n '78
188' ]
+ PCI='78
188'
+ echo '1,4,420,01,4285,6D310D,4FF,78,103,75,2,71,71,16 
1,9,420,01,,,9D0E0,188,5078,100,67,84,84,64
'
+ awk -F, '{print $9}'
+ T='103
5078'
+ '[' -n '103
5078' ]
+ echo '1,4,420,01,4285,6D310D,4FF,78,103,75,2,71,71,16 
1,9,420,01,,,9D0E0,188,5078,100,67,84,84,64
'
+ awk -F, '{print $11}'
+ T='2
67'
+ '[' -n '2
67' -a '2
67' -ne 255 ]
sh: 2
67: bad number
+ echo '1,4,420,01,4285,6D310D,4FF,78,103,75,2,71,71,16 
1,9,420,01,,,9D0E0,188,5078,100,67,84,84,64
'
+ awk -F, '{print $13}'
+ T='71
84'
+ '[' -n '71
84' -a '71
84' -ne 255 ]
sh: 71
84: bad number
+ echo '1,4,420,01,4285,6D310D,4FF,78,103,75,2,71,71,16 
1,9,420,01,,,9D0E0,188,5078,100,67,84,84,64
'
+ awk -F, '{print $14}'
+ T='16 
64
'
+ '[' -n '16 
64
' -a '16 
64
' -ne 255 ]
sh: 16 
64
: bad number
+ '[' -n 21 ]
+ RSSI=-71
+ IFS='
'
+ IDX=1
+ echo '
+GTCCINFO: 
LTE-NR EN-DC service cell: 
1,4,420,01,4285,6D310D,4FF,78,103,75,2,71,71,16 
1,9,420,01,,,9D0E0,188,5078,100,67,84,84,64

+GTCAINFO: 
LTE PCC: 103,120,1279,75,2,1,1,1,71
NR PCC: 5078,392,643296,100,2,,1,3,84
LTE SCC1: 1,0,108,383,3700,50,0,1,1,6,6,56
LTE SCC2: 1,0,101,36,500,100,0,2,1,6,6,69
LTE SCC3: 1,0,140,68,38956,100,0,2,1,6,6,68
LTE SCC4: 1,0,140,68,39154,100,0,2,1,6,6,68


'
+ grep -E ^PCC:
+ LINES=
+ '[' -n  ]
+ T_4G_MODE=
+ T_4G_PBAND=
+ T_4G_PCI=
+ T_4G_EARFCN=
+ T_5G_MODE=
+ T_5G_PBAND=
+ T_5G_PCI=
+ T_5G_EARFCN=
+ '[' -n  ]
+ '[' -n  ]
+ IFS='
'
+ IDX=1
+ echo '
+GTCCINFO: 
LTE-NR EN-DC service cell: 
1,4,420,01,4285,6D310D,4FF,78,103,75,2,71,71,16 
1,9,420,01,,,9D0E0,188,5078,100,67,84,84,64

+GTCAINFO: 
LTE PCC: 103,120,1279,75,2,1,1,1,71
NR PCC: 5078,392,643296,100,2,,1,3,84
LTE SCC1: 1,0,108,383,3700,50,0,1,1,6,6,56
LTE SCC2: 1,0,101,36,500,100,0,2,1,6,6,69
LTE SCC3: 1,0,140,68,38956,100,0,2,1,6,6,68
LTE SCC4: 1,0,140,68,39154,100,0,2,1,6,6,68


'
+ grep -E '^SCC\s?[0-9]:2,'
+ LINES=
+ echo 
+ sed 's/ [\/\+] $//'
+ T_4G_MODE=
+ echo 
+ sed 's/ [\/\+] $//'
+ T_5G_MODE=
+ '[' -n  -a -n  ]
+ '[' -z  ]
+ '[' -n  ]
+ '[' -n  ]
+ sms_tool -d /dev/ttyUSB1 at 'AT+CGMM?'
+ OA='
+CGMM: "FM190W-GL","FM190W"

'
+ echo '
+CGMM: "FM190W-GL","FM190W"

'
+ awk -F '[:,]' '/\+CGMM/{print $2}'
+ xargs
+ MODELA=FM190W-GL
+ sms_tool -d /dev/ttyUSB1 at 'AT+CGMI?'
+ OB='
+CGMI: "Fibocom Wireless Inc."

'
+ echo '
+CGMI: "Fibocom Wireless Inc."

'
+ awk -F '[:,]' '/\+CGMI/{print $2}'
+ xargs
+ MODELB='Fibocom Wireless Inc.'
+ echo 'Fibocom Wireless Inc.'
+ sed 's/Wireless Inc.//'
+ MODELBCUT='Fibocom '
+ MODEL='Fibocom  FM190W-GL'
+ sms_tool -d /dev/ttyUSB1 at 'AT+GMR?'
+ OF='
+GMR: "99103.1000.00.01.06.10"

'
+ echo '
+GMR: "99103.1000.00.01.06.10"

'
+ awk '-F[,:]' '/\+GMR:/ {print $2}'
+ xargs
+ FW=99103.1000.00.01.06.10
+ sms_tool -d /dev/ttyUSB1 at 'AT+CGSN?'
+ OAA='
+CGSN: "351064272748410"

'
+ echo '
+CGSN: "351064272748410"

'
+ + awkxargs '-F[,:]'
 '/\+CGSN:/ {print $2}'
+ NR_IMEI=351064272748410
+ sms_tool -d /dev/ttyUSB1 at 'AT+CIMI?'
+ OBB='
+CIMI: 420012416985880

'
+ echo '
+CIMI: 420012416985880

'
+ awk -F '[,:]'+  '/\+CIMI:/ {print $2}'
xargs
+ NR_IMSI=420012416985880
+ sms_tool -d /dev/ttyUSB1 at AT+ICCID
+ OCC='
+ICCID: 8996601240169858806F

'
+ echo '
+ICCID: 8996601240169858806F

'
+ awk -F '[,:]' '/\+ICCID:/ {print $2}'
+ xargs
+ NR_ICCID=8996601240169858806F
+ sms_tool -d /dev/ttyUSB1 at 'AT+GTSENRDTEMP=1'
+ OT='
'
+ echo '
'
+ awk -F, '/\+GTSENRDTEMP:/{printf "%.1f", $2/1000}'
+ xargs
+ TM=
+ '[' -n  ]
+ basename /dev/ttyUSB1
+ TTY=ttyUSB1
+ readlink -f /sys/class/tty/ttyUSB1/device
+ devpath=/sys/devices/platform/soc/11200000.usb/usb2/2-1/2-1.1/2-1.1:1.1/ttyUSB1
+ readlink -f /sys/devices/platform/soc/11200000.usb/usb2/2-1/2-1.1
+ BASE=/sys/devices/platform/soc/11200000.usb/usb2/2-1/2-1.1
+ readlink+  -f /sys/class/net/br-langrep
 /sys/devices/platform/soc/11200000.usb/usb2/2-1/2-1.1
+ readlink -f /sys/class/net/br-wan
+ readlink -f /sys/class/net/eth0
+ readlink -f /sys/class/net/eth1
+ readlink -f /sys/class/net/eth2
+ readlink -f /sys/class/net/lan1
+ readlink -f /sys/class/net/lan2
+ readlink -f /sys/class/net/lan3
+ readlink -f /sys/class/net/lo
+ readlink -f /sys/class/net/wan
+ readlink -f /sys/class/net/wwan0
+ NETIF=/sys/devices/platform/soc/11200000.usb/usb2/2-1/2-1.1/2-1.1:1.4/net/wwan0
+ readlink -f /sys/devices/platform/soc/11200000.usb/usb2/2-1/2-1.1/2-1.1:1.4/net/wwan0/../../driver
+ basename /sys/bus/usb/drivers/qmi_wwan
+ NETDRV=qmi_wwan
+ PROTO=qmi
+ cat
+ exit 0

Modem Information

"Manufacturer": "QCOM",
"Product": "SDXPINN-IDP _SN:EA9B91F5",
"Vendor": "2cb7",
"ProdID": "0104",
"Bus_speed": "5000",
"Serial_Number": "ea9b91f5"

Subject on OpenWrt
https://forum.openwrt.org/t/fibocom-quectel-fm190-5g-4g-modem-signals/204468/8

AT Commands for FM190W (X75)

English - Fibocom_AT Commands_FM190.pdf
Fibocom_FM350_AT Commands User Manual_V2.10 (1).pdf
Orginal Chiness Fibocom_AT Commands_ FM190W.pdf

Originally created by @ghost on GitHub (Jul 24, 2024). Original GitHub issue: https://github.com/4IceG/luci-app-3ginfo-lite/issues/86 Hi Dear Sir IceG After doing this command (advised by IceG) ``` root@OpenWrt:~# rm /usr/share/3ginfo-lite/modem/usb/2cb70104 root@OpenWrt:~# cp /usr/share/3ginfo-lite/modem/usb/0e8d7126 /usr/share/3ginfo-lite/modem/usb/2cb70104 ``` **When network connected to 4G only the signal appeared .** ![image](https://github.com/user-attachments/assets/66e48b50-5bac-4b66-87da-f6965a89ab02) **Note: its showing only one band 4G , where there are more than 4 bands 4G** <img width="1117" alt="image" src="https://github.com/user-attachments/assets/46620084-5624-4017-82b9-63602a72a307"> **After I switched the network to 5G NSA (4G+5G) .... The error came again .** ![image](https://github.com/user-attachments/assets/aee57a6a-c6c3-4b29-953e-2b7355717800) **Debug from 3ginfo** ``` { "conn_time":"0d, 01:12:18", "conn_time_sec":"4338", "conn_time_since":"20240724144007", "rx":"2.9 GiB", "tx":"301.3 MiB", "modem":"Fibocom FM190W-GL", "mtemp":"", "firmware":"99103.1000.00.01.06.10", "cport":"/dev/ttyUSB1", "protocol":"qmi", "csq":"21", "signal":"67", "operator_name":"stc ksa", "operator_mcc":"420", "operator_mnc":"01", "location":"Saudi Arabia", "mode":"5G NSA |", "registration":"1", "simslot":"", "imei":"351064272748410", "imsi":"420012416985880", "iccid":"8996601240169858806F", "lac_dec":"65535", "lac_hex":"FFFF", "tac_dec":"", "tac_hex":"-", "tac_h":"4285", "tac_d":"17029", "cid_dec":"7155981", "cid_hex":"6D310D", "pci":"78 188", "earfcn":"4FF 9D0E0", "pband":"", "s1band":"", "s1pci":"", "s1earfcn":"", "s2band":"", "s2pci":"", "s2earfcn":"", "s3band":"", "s3pci":"", "s3earfcn":"", "s4band":"", "s4pci":"", "s4earfcn":"", "rsrp":"", "rsrq":"", "rssi":"-71", "sinr":"" } + RES=/usr/share/3ginfo-lite + /usr/share/3ginfo-lite/detect.sh + DEVICE=/dev/ttyUSB1 + '[' -z /dev/ttyUSB1 ] + O= + '[' -e /usr/bin/sms_tool ] + sms_tool -D -d /dev/ttyUSB1 at 'AT+CPIN?;+CSQ;+COPS=3,0;+COPS?;+COPS=3,2;+COPS?;+CREG=2;+CREG?' + O=' +CPIN: READY +CSQ: 21,99 +COPS: 0,0,"stc ksa",13 +COPS: 0,2,"42001",13 +CREG: 2,1,"FFFF","006D310D",13 OK ' + CONFIG=modemdefine + uci show modemdefine + grep -o '@modemdefine\[[0-9]*\]\.modem' + wc -l + xargs + MODEMZ=1 + '[[' 1 ]] + uci -q get 'modemdefine.@general[0].main_network' + SEC= + '[[' 1 '=' 0 ]] + '[[' 1 '=' 1 ]] + uci -q get 'modemdefine.@modemdefine[0].network' + SEC=Modem + '[' -z Modem ] + CONN_TIME=- + RX=- + TX=- + ifstatus Modem + grep '"up": true' + NETUP=' "up": true,' + '[' -n ' "up": true,' ] + uci -q -P /var/state/ get network.Modem.connect_time + CT= + '[' -z ] + ifstatus Modem + awk '-F[:,]' '/uptime/ {print $2}' + xargs + CT=4338 + '[' '!' -z 4338 ] + expr 4338 / 60 / 60 / 24 + D=0 + expr 4338 / 60 / 60 '%' 24 + H=1 + expr 4338 / 60 '%' 60 + M=12 + expr 4338 '%' 60 + S=18 + printf '%dd, %02d:%02d:%02d' 0 1 12 18 + CONN_TIME='0d, 01:12:18' + date '+%s' + date '+%Y%m%d%H%M%S' -d @1721832007 + CONN_TIME_SINCE=20240724144007 + ifstatus Modem + awk '-F"' '/l3_device/ {print $4}' + IFACE=wwan0 + '[' -n wwan0 ] + ifconfig wwan0 + awk '-F[()]' '/bytes/ {printf "%s",$2}' + RX='2.9 GiB' + ifconfig wwan0 + awk '-F[()]' '/bytes/ {printf "%s",$4}' + TX='301.3 MiB' + echo ' +CPIN: READY +CSQ: 21,99 +COPS: 0,0,"stc ksa",13 +COPS: 0,2,"42001",13 +CREG: 2,1,"FFFF","006D310D",13 OK ' + awk '-F[, ]' '/^\+CSQ/ {print $2}' + CSQ=21 + '[' x21 '=' x ] + '[' 21 -ge 0 -a 21 -le 31 ] + CSQ_PER=67 + COPS= + COPS_MCC= + COPS_MNC= + echo ' +CPIN: READY +CSQ: 21,99 +COPS: 0,0,"stc ksa",13 +COPS: 0,2,"42001",13 +CREG: 2,1,"FFFF","006D310D",13 OK ' + awk '-F["]' '/^\+COPS:\s*.,2/ {print $2}' + COPS_NUM=42001 + '[' -n 42001 ] + COPS_MCC=420 + COPS_MNC=01 + echo ' +CPIN: READY +CSQ: 21,99 +COPS: 0,0,"stc ksa",13 +COPS: 0,2,"42001",13 +CREG: 2,1,"FFFF","006D310D",13 OK ' + awk '-F["]' '/^\+COPS:\s*.,0/ {print $2}' + TCOPS='stc ksa' + '[' 'xstc ksa' '!=' x ] + COPS='stc ksa' + '[' -z 'stc ksa' ] + '[' -z 'stc ksa' ] + '[[' stc ksa '=~' ' ' ]] sh: ksa: unknown operand + sms_tool -d /dev/ttyUSB1 at 'AT+COPS?' + sed -n 2p + cut -d '"' -f2 + tr -d '\r' + isp=42001 + isp_num='420 01' + isp_numws=42001 + '[[' stc ksa '=~' '^[0-9]+$' ]] sh: ksa: unknown operand + LOCATIONFILE=/tmp/location + '[' -e /tmp/location ] + touch /tmp/location + cat /tmp/location + LOC='Saudi Arabia' + '[' -n 'Saudi Arabia' ] + cat /tmp/location + LOC='Saudi Arabia' + '[[' Saudi Arabia '==' - ]] sh: Arabia: unknown operand + awk '-F[;]' '/^42001;/ {print $2}' /usr/share/3ginfo-lite/mccmnc.dat + LOC='Saudi Arabia' + '[' -n 'Saudi Arabia' ] + echo 'Saudi Arabia' + echo ' +CPIN: READY +CSQ: 21,99 +COPS: 0,0,"stc ksa",13 +COPS: 0,2,"42001",13 +CREG: 2,1,"FFFF","006D310D",13 OK ' + awk '-F[, ]' '/^\+CPIN:/ {print $0;exit}' + xargs + T='+CPIN: READY' + '[' -n '+CPIN: READY' ] + '[' '+CPIN: READY' '=' '+CPIN: READY' ] + echo ' +CPIN: READY +CSQ: 21,99 +COPS: 0,0,"stc ksa",13 +COPS: 0,2,"42001",13 +CREG: 2,1,"FFFF","006D310D",13 OK ' + awk '-F[, ]' '/^\+CME ERROR:/ {print $0;exit}' + T= + '[' -n ] + echo ' +CPIN: READY +CSQ: 21,99 +COPS: 0,0,"stc ksa",13 +COPS: 0,2,"42001",13 +CREG: 2,1,"FFFF","006D310D",13 OK ' + awk '-F[,]' '/^\+CREG/ {gsub(/[[:space:]"]+/,"");printf "T=\"%d\";LAC_HEX=\"%X\";CID_HEX=\"%X\";LAC_DEC=\"%d\";CID_DEC=\"%d\";MODE_NUM=\"%d\"", $2, "0x"$3, "0x"$4, "0x"$3, "0x"$4, $5}' + eval 'T="1";LAC_HEX="FFFF";CID_HEX="6D310D";LAC_DEC="65535";CID_DEC="7155981";MODE_NUM="13"' + T=1 + LAC_HEX=FFFF + CID_HEX=6D310D + LAC_DEC=65535 + CID_DEC=7155981 + MODE_NUM=13 + REG=1 + '[' -z 13 ] + '[' x13 '=' x0 ] + MODE=- + sms_tool -d /dev/ttyUSB1 at at+cereg + OTX=' ' + echo ' ' + awk '-F[,]' '/^\+CEREG/ {printf "%s", toupper($3)}'+ sed 's/[^A-F0-9]//g' + TAC= + '[' x '!=' x ] + TAC=- + TAC_HEX=- + uci -q get '3ginfo.@3ginfo[0].device' + CONF_DEVICE=/dev/ttyUSB1 + echo x/dev/ttyUSB1 + grep -q 192.168. + '[' -e /usr/bin/sms_tool ] + REGOK=0 + '[' x1 '=' x1 ] + REGOK=1 + getdevicevendorproduct /dev/ttyUSB1 + basename /dev/ttyUSB1 + devname=ttyUSB1 + readlink -f /sys/class/tty/ttyUSB1/device + devpath=/sys/devices/platform/soc/11200000.usb/usb2/2-1/2-1.1/2-1.1:1.1/ttyUSB1 + T=/sys/devices/platform/soc/11200000.usb/usb2/2-1/2-1.1 + cat /sys/devices/platform/soc/11200000.usb/usb2/2-1/2-1.1/idVendor + cat /sys/devices/platform/soc/11200000.usb/usb2/2-1/2-1.1/idProduct + echo usb/2cb70104 + VIDPID=usb/2cb70104 + '[' -e /usr/share/3ginfo-lite/modem/usb/2cb70104 ] + cat /tmp/sysinfo/board_name + . /usr/share/3ginfo-lite/modem/usb/2cb70104 + sms_tool -d /dev/ttyUSB1 at 'AT+GTCCINFO?;+GTCAINFO?' + O=' +GTCCINFO: LTE-NR EN-DC service cell: 1,4,420,01,4285,6D310D,4FF,78,103,75,2,71,71,16 1,9,420,01,,,9D0E0,188,5078,100,67,84,84,64 +GTCAINFO: LTE PCC: 103,120,1279,75,2,1,1,1,71 NR PCC: 5078,392,643296,100,2,,1,3,84 LTE SCC1: 1,0,108,383,3700,50,0,1,1,6,6,56 LTE SCC2: 1,0,101,36,500,100,0,2,1,6,6,69 LTE SCC3: 1,0,140,68,38956,100,0,2,1,6,6,68 LTE SCC4: 1,0,140,68,39154,100,0,2,1,6,6,68 ' + MODE='5G NSA |' + T_MODE= + echo ' +GTCCINFO: LTE-NR EN-DC service cell: 1,4,420,01,4285,6D310D,4FF,78,103,75,2,71,71,16 1,9,420,01,,,9D0E0,188,5078,100,67,84,84,64 +GTCAINFO: LTE PCC: 103,120,1279,75,2,1,1,1,71 NR PCC: 5078,392,643296,100,2,,1,3,84 LTE SCC1: 1,0,108,383,3700,50,0,1,1,6,6,56 LTE SCC2: 1,0,101,36,500,100,0,2,1,6,6,69 LTE SCC3: 1,0,140,68,38956,100,0,2,1,6,6,68 LTE SCC4: 1,0,140,68,39154,100,0,2,1,6,6,68 ' + grep -A3 +GTCCINFO: + grep '1,[49],420' + T1='1,4,420,01,4285,6D310D,4FF,78,103,75,2,71,71,16 1,9,420,01,,,9D0E0,188,5078,100,67,84,84,64 ' + '[' -n '1,4,420,01,4285,6D310D,4FF,78,103,75,2,71,71,16 1,9,420,01,,,9D0E0,188,5078,100,67,84,84,64 ' ] + echo '1,4,420,01,4285,6D310D,4FF,78,103,75,2,71,71,16 1,9,420,01,,,9D0E0,188,5078,100,67,84,84,64 ' + awk -F, '{print $2}' + T_RAT='4 9' + echo '1,4,420,01,4285,6D310D,4FF,78,103,75,2,71,71,16 1,9,420,01,,,9D0E0,188,5078,100,67,84,84,64 ' + awk -F, '{print $5}' + T=4285 + '[' -n 4285 ] + printf '%d' 0x4285 + T_DEC=17029 + T_HEX=4285 + echo '1,4,420,01,4285,6D310D,4FF,78,103,75,2,71,71,16 1,9,420,01,,,9D0E0,188,5078,100,67,84,84,64 ' + awk -F, '{print $7}' + T='4FF 9D0E0' + '[' -n '4FF 9D0E0' ] + EARFCN='4FF 9D0E0' + echo '1,4,420,01,4285,6D310D,4FF,78,103,75,2,71,71,16 1,9,420,01,,,9D0E0,188,5078,100,67,84,84,64 ' + awk -F, '{print $8}' + T='78 188' + '[' -n '78 188' ] + PCI='78 188' + echo '1,4,420,01,4285,6D310D,4FF,78,103,75,2,71,71,16 1,9,420,01,,,9D0E0,188,5078,100,67,84,84,64 ' + awk -F, '{print $9}' + T='103 5078' + '[' -n '103 5078' ] + echo '1,4,420,01,4285,6D310D,4FF,78,103,75,2,71,71,16 1,9,420,01,,,9D0E0,188,5078,100,67,84,84,64 ' + awk -F, '{print $11}' + T='2 67' + '[' -n '2 67' -a '2 67' -ne 255 ] sh: 2 67: bad number + echo '1,4,420,01,4285,6D310D,4FF,78,103,75,2,71,71,16 1,9,420,01,,,9D0E0,188,5078,100,67,84,84,64 ' + awk -F, '{print $13}' + T='71 84' + '[' -n '71 84' -a '71 84' -ne 255 ] sh: 71 84: bad number + echo '1,4,420,01,4285,6D310D,4FF,78,103,75,2,71,71,16 1,9,420,01,,,9D0E0,188,5078,100,67,84,84,64 ' + awk -F, '{print $14}' + T='16 64 ' + '[' -n '16 64 ' -a '16 64 ' -ne 255 ] sh: 16 64 : bad number + '[' -n 21 ] + RSSI=-71 + IFS=' ' + IDX=1 + echo ' +GTCCINFO: LTE-NR EN-DC service cell: 1,4,420,01,4285,6D310D,4FF,78,103,75,2,71,71,16 1,9,420,01,,,9D0E0,188,5078,100,67,84,84,64 +GTCAINFO: LTE PCC: 103,120,1279,75,2,1,1,1,71 NR PCC: 5078,392,643296,100,2,,1,3,84 LTE SCC1: 1,0,108,383,3700,50,0,1,1,6,6,56 LTE SCC2: 1,0,101,36,500,100,0,2,1,6,6,69 LTE SCC3: 1,0,140,68,38956,100,0,2,1,6,6,68 LTE SCC4: 1,0,140,68,39154,100,0,2,1,6,6,68 ' + grep -E ^PCC: + LINES= + '[' -n ] + T_4G_MODE= + T_4G_PBAND= + T_4G_PCI= + T_4G_EARFCN= + T_5G_MODE= + T_5G_PBAND= + T_5G_PCI= + T_5G_EARFCN= + '[' -n ] + '[' -n ] + IFS=' ' + IDX=1 + echo ' +GTCCINFO: LTE-NR EN-DC service cell: 1,4,420,01,4285,6D310D,4FF,78,103,75,2,71,71,16 1,9,420,01,,,9D0E0,188,5078,100,67,84,84,64 +GTCAINFO: LTE PCC: 103,120,1279,75,2,1,1,1,71 NR PCC: 5078,392,643296,100,2,,1,3,84 LTE SCC1: 1,0,108,383,3700,50,0,1,1,6,6,56 LTE SCC2: 1,0,101,36,500,100,0,2,1,6,6,69 LTE SCC3: 1,0,140,68,38956,100,0,2,1,6,6,68 LTE SCC4: 1,0,140,68,39154,100,0,2,1,6,6,68 ' + grep -E '^SCC\s?[0-9]:2,' + LINES= + echo + sed 's/ [\/\+] $//' + T_4G_MODE= + echo + sed 's/ [\/\+] $//' + T_5G_MODE= + '[' -n -a -n ] + '[' -z ] + '[' -n ] + '[' -n ] + sms_tool -d /dev/ttyUSB1 at 'AT+CGMM?' + OA=' +CGMM: "FM190W-GL","FM190W" ' + echo ' +CGMM: "FM190W-GL","FM190W" ' + awk -F '[:,]' '/\+CGMM/{print $2}' + xargs + MODELA=FM190W-GL + sms_tool -d /dev/ttyUSB1 at 'AT+CGMI?' + OB=' +CGMI: "Fibocom Wireless Inc." ' + echo ' +CGMI: "Fibocom Wireless Inc." ' + awk -F '[:,]' '/\+CGMI/{print $2}' + xargs + MODELB='Fibocom Wireless Inc.' + echo 'Fibocom Wireless Inc.' + sed 's/Wireless Inc.//' + MODELBCUT='Fibocom ' + MODEL='Fibocom FM190W-GL' + sms_tool -d /dev/ttyUSB1 at 'AT+GMR?' + OF=' +GMR: "99103.1000.00.01.06.10" ' + echo ' +GMR: "99103.1000.00.01.06.10" ' + awk '-F[,:]' '/\+GMR:/ {print $2}' + xargs + FW=99103.1000.00.01.06.10 + sms_tool -d /dev/ttyUSB1 at 'AT+CGSN?' + OAA=' +CGSN: "351064272748410" ' + echo ' +CGSN: "351064272748410" ' + + awkxargs '-F[,:]' '/\+CGSN:/ {print $2}' + NR_IMEI=351064272748410 + sms_tool -d /dev/ttyUSB1 at 'AT+CIMI?' + OBB=' +CIMI: 420012416985880 ' + echo ' +CIMI: 420012416985880 ' + awk -F '[,:]'+ '/\+CIMI:/ {print $2}' xargs + NR_IMSI=420012416985880 + sms_tool -d /dev/ttyUSB1 at AT+ICCID + OCC=' +ICCID: 8996601240169858806F ' + echo ' +ICCID: 8996601240169858806F ' + awk -F '[,:]' '/\+ICCID:/ {print $2}' + xargs + NR_ICCID=8996601240169858806F + sms_tool -d /dev/ttyUSB1 at 'AT+GTSENRDTEMP=1' + OT=' ' + echo ' ' + awk -F, '/\+GTSENRDTEMP:/{printf "%.1f", $2/1000}' + xargs + TM= + '[' -n ] + basename /dev/ttyUSB1 + TTY=ttyUSB1 + readlink -f /sys/class/tty/ttyUSB1/device + devpath=/sys/devices/platform/soc/11200000.usb/usb2/2-1/2-1.1/2-1.1:1.1/ttyUSB1 + readlink -f /sys/devices/platform/soc/11200000.usb/usb2/2-1/2-1.1 + BASE=/sys/devices/platform/soc/11200000.usb/usb2/2-1/2-1.1 + readlink+ -f /sys/class/net/br-langrep /sys/devices/platform/soc/11200000.usb/usb2/2-1/2-1.1 + readlink -f /sys/class/net/br-wan + readlink -f /sys/class/net/eth0 + readlink -f /sys/class/net/eth1 + readlink -f /sys/class/net/eth2 + readlink -f /sys/class/net/lan1 + readlink -f /sys/class/net/lan2 + readlink -f /sys/class/net/lan3 + readlink -f /sys/class/net/lo + readlink -f /sys/class/net/wan + readlink -f /sys/class/net/wwan0 + NETIF=/sys/devices/platform/soc/11200000.usb/usb2/2-1/2-1.1/2-1.1:1.4/net/wwan0 + readlink -f /sys/devices/platform/soc/11200000.usb/usb2/2-1/2-1.1/2-1.1:1.4/net/wwan0/../../driver + basename /sys/bus/usb/drivers/qmi_wwan + NETDRV=qmi_wwan + PROTO=qmi + cat + exit 0 ``` Modem Information ``` "Manufacturer": "QCOM", "Product": "SDXPINN-IDP _SN:EA9B91F5", "Vendor": "2cb7", "ProdID": "0104", "Bus_speed": "5000", "Serial_Number": "ea9b91f5" ``` Subject on OpenWrt https://forum.openwrt.org/t/fibocom-quectel-fm190-5g-4g-modem-signals/204468/8 ----------------------------------- ### **AT Commands for FM190W (X75)** [English - Fibocom_AT Commands_FM190.pdf](https://github.com/user-attachments/files/16387412/English.-.Fibocom_AT.Commands_FM190.pdf) [Fibocom_FM350_AT Commands User Manual_V2.10 (1).pdf](https://github.com/user-attachments/files/16387413/Fibocom_FM350_AT.Commands.User.Manual_V2.10.1.pdf) [Orginal Chiness Fibocom_AT Commands_ FM190W.pdf](https://github.com/user-attachments/files/16387414/Orginal.Chiness.Fibocom_AT.Commands_.FM190W.pdf)
kerem commented 2026-03-04 11:58:22 +03:00
Author
Owner
Copy link

@obsy commented on GitHub (Jul 25, 2024):

Your case require new parser for FM190. Response for AT command is not fully compatible with FM150 or FM350, so it require new script.

<!-- gh-comment-id:2251132030 --> @obsy commented on GitHub (Jul 25, 2024): Your case require new parser for FM190. Response for AT command is not fully compatible with FM150 or FM350, so it require new script.
kerem commented 2026-03-04 11:58:22 +03:00
Author
Owner
Copy link

@ghost commented on GitHub (Jul 26, 2024):

Your case require new parser for FM190. Response for AT command is not fully compatible with FM150 or FM350, so it require new script.

@4IceG @obsy

I added AT commands file for FM190W and FM350 ..... they are similar (80%)

English - Fibocom_AT Commands_FM190.pdf
Fibocom_FM350_AT Commands User Manual_V2.10 (1).pdf
Orginal Chiness Fibocom_AT Commands_ FM190W.pdf

<!-- gh-comment-id:2252069371 --> @ghost commented on GitHub (Jul 26, 2024): > Your case require new parser for FM190. Response for AT command is not fully compatible with FM150 or FM350, so it require new script. @4IceG @obsy I added AT commands file for FM190W and FM350 ..... they are similar (80%) [English - Fibocom_AT Commands_FM190.pdf](https://github.com/user-attachments/files/16387412/English.-.Fibocom_AT.Commands_FM190.pdf) [Fibocom_FM350_AT Commands User Manual_V2.10 (1).pdf](https://github.com/user-attachments/files/16387413/Fibocom_FM350_AT.Commands.User.Manual_V2.10.1.pdf) [Orginal Chiness Fibocom_AT Commands_ FM190W.pdf](https://github.com/user-attachments/files/16387414/Orginal.Chiness.Fibocom_AT.Commands_.FM190W.pdf)
kerem commented 2026-03-04 11:58:22 +03:00
Author
Owner
Copy link

@obsy commented on GitHub (Jul 26, 2024):

Similar. Not the same. And that's the difference from a scripting perspective.

<!-- gh-comment-id:2252088418 --> @obsy commented on GitHub (Jul 26, 2024): Similar. Not the same. And that's the difference from a scripting perspective.
kerem commented 2026-03-04 11:58:22 +03:00
Author
Owner
Copy link

@ghost commented on GitHub (Jul 26, 2024):

Similar. Not the same. And that's the difference from a scripting perspective.

Is there anyway to get it done ? I mean to be added

<!-- gh-comment-id:2252096812 --> @ghost commented on GitHub (Jul 26, 2024): > Similar. Not the same. And that's the difference from a scripting perspective. Is there anyway to get it done ? I mean to be added
kerem commented 2026-03-04 11:58:22 +03:00
Author
Owner
Copy link

@obsy commented on GitHub (Jul 26, 2024):

Be patient. The script needs to be written.

<!-- gh-comment-id:2252117770 --> @obsy commented on GitHub (Jul 26, 2024): Be patient. The script needs to be written.
kerem commented 2026-03-04 11:58:22 +03:00
Author
Owner
Copy link

@ghost commented on GitHub (Jul 28, 2024):

Dear @4IceG @obsy
if there is any file or documents you need me to share it let me know ...
Really I appreciate for your support

<!-- gh-comment-id:2254526974 --> @ghost commented on GitHub (Jul 28, 2024): Dear @4IceG @obsy if there is any file or documents you need me to share it let me know ... Really I appreciate for your support
kerem commented 2026-03-04 11:58:23 +03:00
Author
Owner
Copy link

@obsy commented on GitHub (Sep 12, 2024):

Update script: github.com/obsy/packages@6e46db60d6
@4IceG: please adapt it to your project

For 5G SA in FM150 RSSI is not displayed, only RSRP

<!-- gh-comment-id:2345297638 --> @obsy commented on GitHub (Sep 12, 2024): Update script: https://github.com/obsy/packages/commit/6e46db60d611026129f7019b655702d700dd471d @4IceG: please adapt it to your project For 5G SA in FM150 RSSI is not displayed, only RSRP
kerem commented 2026-03-04 11:58:23 +03:00
Author
Owner
Copy link

@4IceG commented on GitHub (Sep 15, 2024):

@ghost I don't know if it will work, but you can check it out.

Unpack test.zip archive and copy files to usr/share/3ginfo-lite/modem/usb.

<!-- gh-comment-id:2351706085 --> @4IceG commented on GitHub (Sep 15, 2024): @ghost I don't know if it will work, but you can check it out. Unpack [test.zip](https://github.com/user-attachments/files/17006859/test.zip) archive and copy files to `usr/share/3ginfo-lite/modem/usb`.
kerem commented 2026-03-04 11:58:23 +03:00
Author
Owner
Copy link

@KFOq commented on GitHub (Sep 23, 2024):

Hi , I will try to test it this week . thank you for efforts .

<!-- gh-comment-id:2368252059 --> @KFOq commented on GitHub (Sep 23, 2024): Hi , I will try to test it this week . thank you for efforts .
kerem commented 2026-03-04 11:58:23 +03:00
Author
Owner
Copy link

@KFOq commented on GitHub (Nov 14, 2024):

@ghost I don't know if it will work, but you can check it out.

Unpack test.zip archive and copy files to usr/share/3ginfo-lite/modem/usb.

Hi Boss I tested your package it was not working as I know ... maybe there is something wrong with my setup or the package doesn't match with modem FM190W-GL

<!-- gh-comment-id:2476543023 --> @KFOq commented on GitHub (Nov 14, 2024): > @ghost I don't know if it will work, but you can check it out. > > Unpack [test.zip](https://github.com/user-attachments/files/17006859/test.zip) archive and copy files to `usr/share/3ginfo-lite/modem/usb`. Hi Boss I tested your package it was not working as I know ... maybe there is something wrong with my setup or the package doesn't match with modem FM190W-GL
Sign in to join this conversation.
No Branch/Tag specified
Branches Tags
main
1.0.77-r20260215
1.0.76-r20250609
1.0.75-r20250505
1.0.74-20240827
1.0.73-20240622
1.0.72-20240519
1.0.71-20240512
1.0.70-20240510
1.0.69-20240427
1.0.68-20240422
1.0.67-20240421
1.0.66-20240421
1.0.65-20240330
1.0.64-20240201
1.0.63-20240127
1.0.62-20240113
1.0.61-20240102
1.0.60-20231204
1.0.59-20231203
1.0.58-20231021
1.0.57-20231008
1.0.56-20230930
1.0.55-20230910
1.0.54-20230903
1.0.53-20230815
1.0.52-20230711
1.0.51-20230710
1.0.50-20230705
1.0.49-20230701
1.0.48-20230629
1.0.47-20230531
1.0.46-20230501
1.0.45-20230410
1.0.44-20230406
1.0.43-20230406
1.0.42-20230404
1.0.41-20230403
1.0.40-20230321
1.0.39-20230321
1.0.38-20230320
1.0.38-20230312
1.0.37-20230223
1.0.36-20230125
1.0.35-20230106
1.0.33-20221207
1.0.32-20221127
1.0.31-20221127
1.0.30-20221021
1.0.29-20221018
1.0.28-20221017
1.0.26-20220930
1.0.25-20220913
1.0.25-20220912
1.0.24-20220910
1.0.23-20220821
1.0.22-20220821
1.0.21-20220817
1.0.20-20220809
1.0.20-20220808
1.0.19-20220806
1.0.19-20220805
1.0.18-20220725
1.0.18-20220720
1.0.18-20220716
1.0.18-20220707
1.0.18-20220706
1.0.17-20220701
1.0.16-20220426
1.0.16-20220422
1.0.16-20220418
1.0.16-20220416
1.0.16-20220415
1.0.15-20220325
1.0.15-20220316
1.0.15-20220315
1.0.14-20220217
1.0.13-20220217
1.0.13-20220216
1.0.12-20220213
1.0.11-20220213
1.0.10-20220212
1.0.10-20220206
1.0.9-20220204
1.0.9-20220113
1.0.9-20220112
1.0.9-20211218
1.0.9-20211213
1.0.8-20211213
1.0.8-20211205
1.0.8-20211204
1.0.8-20211120
1.0.8-2021-10-31
1.0.7-27082021
1.0.7-24082021
1.0.6-22082021
1.0.6-20082021
1.0.6-18082021
1.0.5-16082021
1.0.4-24072021
1.0.4-18072021
1.0.3-14072021
1.0.3-12072021
1.0.3-11072021
1.0.2-09072021
1.0.2-08072021
Labels
Clear labels   
pull-request

Mirrored from GitHub Pull Request

No labels
pull-request
Milestone
Clear milestone
No items
No milestone
Projects
Clear projects
No items
No project
Assignees
Clear assignees
No assignees
1 participant
Notifications
Due date
The due date is invalid or out of range. Please use the format "yyyy-mm-dd".

No due date set.

Dependencies

No dependencies set.

Reference
starred/luci-app-3ginfo-lite#68
No description provided.