[GH-ISSUE #110] Modem Signals (Snapdragon X75) #86

New issue

Open

opened 2026-03-04 11:58:31 +03:00 by kerem · 0 comments

kerem commented

2026-03-04 11:58:31 +03:00

Owner

Originally created by @KFOq on GitHub (Dec 26, 2024).
Original GitHub issue: https://github.com/4IceG/luci-app-3ginfo-lite/issues/110

Reopen subject :

Hi Dear Sir IceG

After doing this command (advised by IceG)

root@OpenWrt:~# cp /usr/share/3ginfo-lite/modem/usb/0e8d7126 /usr/share/3ginfo-lite/modem/usb/2cb70104
When network connected to 4G only the signal appeared .

Note: its showing only one band 4G , where there are more than 4 bands 4G

After I switched the network to 5G NSA (4G+5G) .... The error came again .

AT commands file for these modems (which is same command mostly)

FM190 Series &FG190 Series (X75 modem)
FG370 Series (Meditek modem)

Fibocom_AT Commands 2025 MBB_V2.4.pdf

I tried this but I think I didn't do right or the scripts on package is not matching with modem

@ghost I don't know if it will work, but you can check it out.
Unpack test.zip archive and copy files to usr/share/3ginfo-lite/modem/usb.

Hi Boss I tested your package it was not working as I know ... maybe there is something wrong with my setup or the package doesn't match with modem FM190W-GL

Please in same time can you take look for these points :

Can you add RSRP for 5G bands for modems like RM520 or RM551 "both same at command" ? (to be added after mhz maybe you can do it for all 4g and 5g
Can you increase the limit of CA cells that showing in interface (limited only CA band SCC4).... because in my case I have 5 bands 4G and 2 bands 5G NSA .... its better to make it up to band (SCC7)

Originally created by @KFOq on GitHub (Dec 26, 2024). Original GitHub issue: https://github.com/4IceG/luci-app-3ginfo-lite/issues/110 Reopen subject : Hi Dear Sir IceG After doing this command (advised by IceG) root@OpenWrt:~# cp /usr/share/3ginfo-lite/modem/usb/0e8d7126 /usr/share/3ginfo-lite/modem/usb/2cb70104 When network connected to 4G only the signal appeared . ![image](https://github.com/user-attachments/assets/6dd17256-63f5-4a0c-b31f-fe97e9a8e0e0) Note: its showing only one band 4G , where there are more than 4 bands 4G ![image](https://github.com/user-attachments/assets/758280f9-9336-4028-8924-67f756430832) After I switched the network to 5G NSA (4G+5G) .... The error came again . ![image](https://github.com/user-attachments/assets/6f5d044a-3620-43f1-b350-3150dcdc674f) AT commands file for these modems (which is same command mostly) - FM190 Series &FG190 Series (X75 modem) - FG370 Series (Meditek modem) [Fibocom_AT Commands 2025 MBB_V2.4.pdf](https://github.com/user-attachments/files/18254340/Fibocom_AT.Commands.2025.MBB_V2.4.pdf) I tried this but I think I didn't do right or the scripts on package is not matching with modem <img width="737" alt="image" src="https://github.com/user-attachments/assets/7aa5958a-0a44-49a4-b025-aa99cd459956" /> > > @ghost I don't know if it will work, but you can check it out. > > Unpack [test.zip](https://github.com/user-attachments/files/17006859/test.zip) archive and copy files to `usr/share/3ginfo-lite/modem/usb`. > > Hi Boss I tested your package it was not working as I know ... maybe there is something wrong with my setup or the package doesn't match with modem FM190W-GL -------------------------------------------------------------------------- Please in same time can you take look for these points : - Can you add RSRP for 5G bands for modems like RM520 or RM551 "both same at command" ? (to be added after mhz maybe you can do it for all 4g and 5g <img width="887" alt="image" src="https://github.com/user-attachments/assets/0f451ef6-5571-4d70-96df-61830e7845e9" /> - Can you increase the limit of CA cells that showing in interface (limited only CA band SCC4).... because in my case I have 5 bands 4G and 2 bands 5G NSA .... its better to make it up to band (SCC7) <img width="699" alt="image" src="https://github.com/user-attachments/assets/69e1b5cd-8457-493c-9955-82f65576c34b" />