[GH-ISSUE #92] 3ginfo and T99W175 again and again... ^_^ #71

New issue

Open

opened 2026-03-04 11:58:23 +03:00 by kerem · 0 comments

kerem commented

2026-03-04 11:58:23 +03:00

Owner

Originally created by @aivavia on GitHub (Aug 16, 2024).
Original GitHub issue: https://github.com/4IceG/luci-app-3ginfo-lite/issues/92

Hi there, mr Rafal. Something is broken again with 3ginfo and Foxconn T99W175 module.
It stucks at all and shows me absolutely nothing in web-ui.
If I delete two files 05c69025 and 05c690d5 in /usr/bla-bla-bla/modem/usb it works very fast but shows CSQ only.
the cli 3ginfo.sh stucks for a while either (10-20 secs) but then shows me this:
root@OpenWrt:~# . /usr/share/3ginfo-lite/3ginfo.sh uci: Entry not found uci: Entry not found ash: ROSTELECOM: unknown operand ash: ROSTELECOM: unknown operand No response from modem. No response from modem. No response from modem. { "conn_time":"0d, 00:03:48", "conn_time_sec":"228", "conn_time_since":"20240816171933", "rx":"158.9 KiB", "tx":"59.7 KiB", "modem":"Qualcomm AT+CPIN?;+CSQ;+COPS=3,0;+COPS?;+COPS=3,2;+COPS?;+CREG=2;+CREG? +CPIN: READY +CSQ: 22,99 +COPS: 0,0,ROSTELECOM ROSTELECOM,7 +COPS: 0,2,25020,7 +CREG: 2,1,697F,3842515,7 T99W175", "mtemp":"36 °C", "firmware":"", "cport":"/dev/ttyUSB2", "protocol":"qmi", "csq":"21", "signal":"67", "operator_name":"ROSTELECOM ROSTELECOM", "operator_mcc":"250", "operator_mnc":"20", "location":"Russia", "mode":"LTE-A | B7 (2600 MHz) + B40 (2300 MHz) / B1 (2100 MHz) / B3 (1800 MHz)", "registration":"1", "simslot":"", "imei":"015829000102066 AT+COPS? at+cereg AT^TEMP? AT+CGMM T99W175", "imsi":"250205491431187", "iccid":"89701205769004311874", "lac_dec":"27007", "lac_hex":"697F", "tac_dec":"27007", "tac_hex":"697F", "tac_h":"", "tac_d":"", "cid_dec":"58991893", "cid_hex":"3842515", "pci":"102", "earfcn":"3400", "pband":"B7 (2600 MHz) @10.0 MHz", "s1band":"B40 (2300 MHz) @20.0 MHz", "s1pci":"202", "s1earfcn":"38950", "s2band":"B1 (2100 MHz) @10.0 MHz", "s2pci":"323", "s2earfcn":"100", "s3band":"B3 (1800 MHz) @20.0 MHz", "s3pci":"3", "s3earfcn":"1850", "s4band":"", "s4pci":"", "s4earfcn":"", "rsrp":"-107.2", "rsrq":"-19.9", "rssi":"-70.7", "sinr":"-6.0" }
Please could you fix it? or tell me what I need to do. no MM is installed, only luci-proto-qmi and luci-proto-mbim, and all necessary packages to work with modem module.
By the way, I start the ttyUSB ports with 'echo 05c6 9025 > /sys/bus/usb-serial/drivers/generic/new_id'
because option1 driver doesn't work propertly with this module. May it cause the errors?
owrt 23.05.4 installed at MTK7621 based device.

Originally created by @aivavia on GitHub (Aug 16, 2024). Original GitHub issue: https://github.com/4IceG/luci-app-3ginfo-lite/issues/92 Hi there, mr Rafal. Something is broken again with 3ginfo and Foxconn T99W175 module. It stucks at all and shows me absolutely nothing in web-ui. If I delete two files 05c69025 and 05c690d5 in /usr/bla-bla-bla/modem/usb it works very fast but shows CSQ only. the cli 3ginfo.sh stucks for a while either (10-20 secs) but then shows me this: `root@OpenWrt:~# . /usr/share/3ginfo-lite/3ginfo.sh uci: Entry not found uci: Entry not found ash: ROSTELECOM: unknown operand ash: ROSTELECOM: unknown operand No response from modem. No response from modem. No response from modem. { "conn_time":"0d, 00:03:48", "conn_time_sec":"228", "conn_time_since":"20240816171933", "rx":"158.9 KiB", "tx":"59.7 KiB", "modem":"Qualcomm AT+CPIN?;+CSQ;+COPS=3,0;+COPS?;+COPS=3,2;+COPS?;+CREG=2;+CREG? +CPIN: READY +CSQ: 22,99 +COPS: 0,0,ROSTELECOM ROSTELECOM,7 +COPS: 0,2,25020,7 +CREG: 2,1,697F,3842515,7 T99W175", "mtemp":"36 °C", "firmware":"", "cport":"/dev/ttyUSB2", "protocol":"qmi", "csq":"21", "signal":"67", "operator_name":"ROSTELECOM ROSTELECOM", "operator_mcc":"250", "operator_mnc":"20", "location":"Russia", "mode":"LTE-A | B7 (2600 MHz) + B40 (2300 MHz) / B1 (2100 MHz) / B3 (1800 MHz)", "registration":"1", "simslot":"", "imei":"015829000102066 AT+COPS? at+cereg AT^TEMP? AT+CGMM T99W175", "imsi":"250205491431187", "iccid":"89701205769004311874", "lac_dec":"27007", "lac_hex":"697F", "tac_dec":"27007", "tac_hex":"697F", "tac_h":"", "tac_d":"", "cid_dec":"58991893", "cid_hex":"3842515", "pci":"102", "earfcn":"3400", "pband":"B7 (2600 MHz) @10.0 MHz", "s1band":"B40 (2300 MHz) @20.0 MHz", "s1pci":"202", "s1earfcn":"38950", "s2band":"B1 (2100 MHz) @10.0 MHz", "s2pci":"323", "s2earfcn":"100", "s3band":"B3 (1800 MHz) @20.0 MHz", "s3pci":"3", "s3earfcn":"1850", "s4band":"", "s4pci":"", "s4earfcn":"", "rsrp":"-107.2", "rsrq":"-19.9", "rssi":"-70.7", "sinr":"-6.0" } ` Please could you fix it? or tell me what I need to do. no MM is installed, only luci-proto-qmi and luci-proto-mbim, and all necessary packages to work with modem module. By the way, I start the ttyUSB ports with 'echo 05c6 9025 > /sys/bus/usb-serial/drivers/generic/new_id' because option1 driver doesn't work propertly with this module. May it cause the errors? owrt 23.05.4 installed at MTK7621 based device.

kerem referenced this issue

2026-03-13 13:40:58 +03:00

[GH-ISSUE #71] No Operator Name in LT4220 (QMI) #186

No labels

pull-request

No milestone

No project

No assignees

1 participant

Notifications

Due date

The due date is invalid or out of range. Please use the format "yyyy-mm-dd".

No due date set.

Dependencies

No dependencies set.

Reference

starred/luci-app-3ginfo-lite#71

No description provided.

Rows
Columns