[GH-ISSUE #847] Problem after power failure

No labels

No milestone

No project

No assignees

1 participant

Notifications

Due date

The due date is invalid or out of range. Please use the format "yyyy-mm-dd".

No due date set.

Dependencies

No dependencies set.

Reference

starred/WiFiManager#714

kerem commented

2026-02-28 01:26:43 +03:00

Owner

Originally created by @Muhammed-Hayr-Ali on GitHub (Mar 12, 2019).
Original GitHub issue: https://github.com/tzapu/WiFiManager/issues/847

PLEASE TRY DEVELOPMENT BRANCH before submitting bugs on release or master, in case they were already fixed.

POST SERIAL OUTPUT !

Issues without basic info will be ignored or closed!

Please fill the info fields, it helps to get you faster support ;)

if you have a stack dump decode it:
https://github.com/esp8266/Arduino/blob/master/doc/Troubleshooting/stack_dump.rst

for better debug messages:
https://github.com/esp8266/Arduino/blob/master/doc/Troubleshooting/debugging.rst

----------------------------- Remove above -----------------------------

Basic Infos

Hardware

WiFimanager Branch/Release:

Master
Development

Esp8266/Esp32:

ESP8266
ESP32

Hardware: ESP-12e, esp01, esp25

ESP01
ESP12 E/F/S (nodemcu, wemos, feather)
Other

ESP Core Version: 2.4.0, staging

2.3.0
2.4.0
staging (master/dev)

Description

Problem description

Settings in IDE

Module: NodeMcu

Additional libraries:

Sketch


#include <Arduino.h>

void setup() {

}

void loop() {

}

*SS: Adding parameter
*SS: device-token
*SS:
*SS: AutoConnect
*SS: Connecting as wifi client...
*SS: Using last saved values, should be faster
*SS: Connection result:
*SS: 1
*SS:
*SS: Configuring access point...
*SS: ssw
*SS: AP IP address:
*SS: 192.168.4.1
*SS: HTTP server started

Problem after power failure
esp8266 works faster than the router
If the WiFi network is not found
esp8266 is reset automatically```

*SS: Using last saved values, should be faster
We need a time interval of only 90 seconds

Originally created by @Muhammed-Hayr-Ali on GitHub (Mar 12, 2019). Original GitHub issue: https://github.com/tzapu/WiFiManager/issues/847 ## PLEASE TRY DEVELOPMENT BRANCH before submitting bugs on release or master, in case they were already fixed. ## ## POST SERIAL OUTPUT ! Issues without basic info will be ignored or closed! Please fill the info fields, it helps to get you faster support ;) if you have a stack dump decode it: https://github.com/esp8266/Arduino/blob/master/doc/Troubleshooting/stack_dump.rst for better debug messages: https://github.com/esp8266/Arduino/blob/master/doc/Troubleshooting/debugging.rst ----------------------------- Remove above ----------------------------- ### Basic Infos #### Hardware **WiFimanager Branch/Release:** - [x] Master - [ ] Development **Esp8266/Esp32:** - [x] ESP8266 - [ ] ESP32 **Hardware: ESP-12e, esp01, esp25** - [x] ESP01 - [x] ESP12 E/F/S (nodemcu, wemos, feather) - [ ] Other **ESP Core Version: 2.4.0, staging** - [ ] 2.3.0 - [x] 2.4.0 - [ ] staging (master/dev) ### Description Problem description ### Settings in IDE Module: NodeMcu Additional libraries: ### Sketch ```cpp #include <Arduino.h> void setup() { } void loop() { } ``` *SS: Adding parameter *SS: device-token *SS: *SS: AutoConnect *SS: Connecting as wifi client... *SS: Using last saved values, should be faster *SS: Connection result: *SS: 1 *SS: *SS: Configuring access point... *SS: ssw *SS: AP IP address: *SS: 192.168.4.1 *SS: HTTP server started ``` Problem after power failure esp8266 works faster than the router If the WiFi network is not found esp8266 is reset automatically``` *SS: Using last saved values, should be faster We need a time interval of only 90 seconds

kerem

closed this issue
added the
duplicate
label

Rows
Columns

[GH-ISSUE #847] Problem after power failure #714