[GH-ISSUE #169] KIOXIA-EXCERIA PLUS G2 SSD is not supported. #781

New issue

Closed

opened 2026-03-12 16:53:44 +03:00 by kerem · 3 comments

kerem commented

2026-03-12 16:53:44 +03:00

Owner

Originally created by @WanpengQian on GitHub (Dec 13, 2023).
Original GitHub issue: https://github.com/007revad/Synology_HDD_db/issues/169

Hi, I add two of these SSDs to DS1821+, and run the script. the output is

Synology_HDD_db v3.2.68
DS1821+ DSM 7.2.1-69057-3 
StorageManager 1.0.0-0017

Using options: -nr --showedits
Running from: /volume1/Synology_HDD_db-3.2.68/syno_hdd_db.sh

WARNING{OFF} No vendor found for id 0x1e0f
Contact 007revad to get your drive added.

WARNING{OFF} No vendor found for id 0x1e0f
Contact 007revad to get your drive added.

HDD/SSD models found: 1
MN06ACA10T,0603

M.2 drive models found: 2
KIOXIA-EXCERIA PLUS G2 SSD,ECFA11.3
KIOXIA-EXCERIA PLUS G2 SSD,ECFA13.3

No M.2 PCIe cards found

No Expansion Units found

MN06ACA10T already exists in ds1821+_host_v7.db
Added KIOXIA-EXCERIA PLUS G2 SSD to ds1821+_host_v7.db
Updated KIOXIA-EXCERIA PLUS G2 SSD to ds1821+_host_v7.db

Backed up synoinfo.conf

Support disk compatibility already enabled.

Disabled support memory compatibility.

Max memory already set to 32 GB.

NVMe support already enabled.

M.2 volume support already enabled.

after reboot. it shows

root@DNAS:~# nvme id-ctrl /dev/nvme0n1
NVME Identify Controller:
vid     : 0x1e0f
ssvid   : 0x1e0f
sn      : *******************        
mn      : KIOXIA-EXCERIA PLUS G2 SSD              
fr      : ECFA13.3
rab     : 1
ieee    : 8ce38e
cmic    : 0
mdts    : 9
cntlid  : 1
ver     : 10300
rtd3r   : 989680
rtd3e   : 989680
oaes    : 0x200
oacs    : 0x17
acl     : 3
aerl    : 3
frmw    : 0x12
lpa     : 0xa
elpe    : 62
npss    : 4
avscc   : 0x1
apsta   : 0x1
wctemp  : 345
cctemp  : 363
mtfa    : 100
hmpre   : 0
hmmin   : 0
tnvmcap : 500107862016
unvmcap : 0
rpmbs   : 0
sqes    : 0x66
cqes    : 0x44
nn      : 1
oncs    : 0x5f
fuses   : 0
fna     : 0
vwc     : 0x1
awun    : 255
awupf   : 0
nvscc   : 1
acwu    : 0
sgls    : 0
ps    0 : mp:10.73W operational enlat:1 exlat:1 rrt:0 rrl:0
          rwt:0 rwl:0 idle_power:- active_power:-
ps    1 : mp:7.69W operational enlat:1 exlat:1 rrt:1 rrl:1
          rwt:1 rwl:1 idle_power:- active_power:-
ps    2 : mp:6.18W operational enlat:1 exlat:1 rrt:2 rrl:2
          rwt:2 rwl:2 idle_power:- active_power:-
ps    3 : mp:0.0500W non-operational enlat:7000 exlat:5000 rrt:3 rrl:3
          rwt:3 rwl:3 idle_power:- active_power:-
ps    4 : mp:0.0050W non-operational enlat:13000 exlat:36000 rrt:4 rrl:4
          rwt:4 rwl:4 idle_power:- active_power:-

what information else do I need to provide to support these SSDs?
Thanks.

for more information about these SSDs, here is the link

https://www.kioxia.com/ja-jp/personal/ssd/exceria-plus-g2-nvme-ssd.html

Sorry for the Japanese, these product cannot be found when switch language to english page.

Originally created by @WanpengQian on GitHub (Dec 13, 2023). Original GitHub issue: https://github.com/007revad/Synology_HDD_db/issues/169 Hi, I add two of these SSDs to DS1821+, and run the script. the output is ``` Synology_HDD_db v3.2.68 DS1821+ DSM 7.2.1-69057-3 StorageManager 1.0.0-0017 Using options: -nr --showedits Running from: /volume1/Synology_HDD_db-3.2.68/syno_hdd_db.sh WARNING{OFF} No vendor found for id 0x1e0f Contact 007revad to get your drive added. WARNING{OFF} No vendor found for id 0x1e0f Contact 007revad to get your drive added. HDD/SSD models found: 1 MN06ACA10T,0603 M.2 drive models found: 2 KIOXIA-EXCERIA PLUS G2 SSD,ECFA11.3 KIOXIA-EXCERIA PLUS G2 SSD,ECFA13.3 No M.2 PCIe cards found No Expansion Units found MN06ACA10T already exists in ds1821+_host_v7.db Added KIOXIA-EXCERIA PLUS G2 SSD to ds1821+_host_v7.db Updated KIOXIA-EXCERIA PLUS G2 SSD to ds1821+_host_v7.db Backed up synoinfo.conf Support disk compatibility already enabled. Disabled support memory compatibility. Max memory already set to 32 GB. NVMe support already enabled. M.2 volume support already enabled. ``` after reboot. it shows ![Snipaste_2023-12-13_18-46-40](https://github.com/007revad/Synology_HDD_db/assets/6359418/8b164fed-eb9b-4038-8f99-2288ada2e8a4) ``` root@DNAS:~# nvme id-ctrl /dev/nvme0n1 NVME Identify Controller: vid : 0x1e0f ssvid : 0x1e0f sn : ******************* mn : KIOXIA-EXCERIA PLUS G2 SSD fr : ECFA13.3 rab : 1 ieee : 8ce38e cmic : 0 mdts : 9 cntlid : 1 ver : 10300 rtd3r : 989680 rtd3e : 989680 oaes : 0x200 oacs : 0x17 acl : 3 aerl : 3 frmw : 0x12 lpa : 0xa elpe : 62 npss : 4 avscc : 0x1 apsta : 0x1 wctemp : 345 cctemp : 363 mtfa : 100 hmpre : 0 hmmin : 0 tnvmcap : 500107862016 unvmcap : 0 rpmbs : 0 sqes : 0x66 cqes : 0x44 nn : 1 oncs : 0x5f fuses : 0 fna : 0 vwc : 0x1 awun : 255 awupf : 0 nvscc : 1 acwu : 0 sgls : 0 ps 0 : mp:10.73W operational enlat:1 exlat:1 rrt:0 rrl:0 rwt:0 rwl:0 idle_power:- active_power:- ps 1 : mp:7.69W operational enlat:1 exlat:1 rrt:1 rrl:1 rwt:1 rwl:1 idle_power:- active_power:- ps 2 : mp:6.18W operational enlat:1 exlat:1 rrt:2 rrl:2 rwt:2 rwl:2 idle_power:- active_power:- ps 3 : mp:0.0500W non-operational enlat:7000 exlat:5000 rrt:3 rrl:3 rwt:3 rwl:3 idle_power:- active_power:- ps 4 : mp:0.0050W non-operational enlat:13000 exlat:36000 rrt:4 rrl:4 rwt:4 rwl:4 idle_power:- active_power:- ``` what information else do I need to provide to support these SSDs? Thanks. for more information about these SSDs, here is the link https://www.kioxia.com/ja-jp/personal/ssd/exceria-plus-g2-nvme-ssd.html Sorry for the Japanese, these product cannot be found when switch language to english page.

kerem closed this issue

2026-03-12 16:53:49 +03:00

kerem commented

2026-03-12 16:53:55 +03:00

Author

Owner

@007revad commented on GitHub (Dec 13, 2023):

I've just released an new version that includes the KIOXIA vid
https://github.com/007revad/Synology_HDD_db/releases/tag/v3.2.69

@007revad commented on GitHub (Dec 13, 2023): I've just released an new version that includes the KIOXIA vid https://github.com/007revad/Synology_HDD_db/releases/tag/v3.2.69

kerem commented

2026-03-12 16:54:00 +03:00

Author

Owner

@WanpengQian commented on GitHub (Dec 18, 2023):

after execute the latest script. still cannot add M2 ssd as pool

root@DNAS:/volume2/Share/Script/Synology_HDD_db-3.3.70# ./syno_hdd_db.sh 
Synology_HDD_db v3.3.70
DS1821+ DSM 7.2.1-69057-3 
StorageManager 1.0.0-0017

Using options: 
Running from: /volume2/Share/Script/Synology_HDD_db-3.3.70/syno_hdd_db.sh
./syno_hdd_db.sh: line 314: lsblk: command not found
Added KIOXIA to pci_vendor_ids

HDD/SSD models found: 1
MN06ACA10T,0603

M.2 drive models found: 2
KIOXIA-EXCERIA PLUS G2 SSD,ECFA11.3
KIOXIA-EXCERIA PLUS G2 SSD,ECFA13.3

No M.2 PCIe cards found

No Expansion Units found

MN06ACA10T already exists in ds1821+_host_v7.db
Updated KIOXIA-EXCERIA PLUS G2 SSD to ds1821+_host_v7.db
Updated KIOXIA-EXCERIA PLUS G2 SSD to ds1821+_host_v7.db

Support disk compatibility already enabled.

Re-enabled support memory compatibility.

NVMe support already enabled.

M.2 volume support already enabled.

Re-enabled drive db auto updates.

DSM successfully checked disk compatibility.

You may need to reboot the Synology to see the changes.

@WanpengQian commented on GitHub (Dec 18, 2023): after execute the latest script. still cannot add M2 ssd as pool ``` root@DNAS:/volume2/Share/Script/Synology_HDD_db-3.3.70# ./syno_hdd_db.sh Synology_HDD_db v3.3.70 DS1821+ DSM 7.2.1-69057-3 StorageManager 1.0.0-0017 Using options: Running from: /volume2/Share/Script/Synology_HDD_db-3.3.70/syno_hdd_db.sh ./syno_hdd_db.sh: line 314: lsblk: command not found Added KIOXIA to pci_vendor_ids HDD/SSD models found: 1 MN06ACA10T,0603 M.2 drive models found: 2 KIOXIA-EXCERIA PLUS G2 SSD,ECFA11.3 KIOXIA-EXCERIA PLUS G2 SSD,ECFA13.3 No M.2 PCIe cards found No Expansion Units found MN06ACA10T already exists in ds1821+_host_v7.db Updated KIOXIA-EXCERIA PLUS G2 SSD to ds1821+_host_v7.db Updated KIOXIA-EXCERIA PLUS G2 SSD to ds1821+_host_v7.db Support disk compatibility already enabled. Re-enabled support memory compatibility. NVMe support already enabled. M.2 volume support already enabled. Re-enabled drive db auto updates. DSM successfully checked disk compatibility. You may need to reboot the Synology to see the changes. ``` ![Snipaste_2023-12-18_18-15-50](https://github.com/007revad/Synology_HDD_db/assets/6359418/15e23b07-89dd-405b-b6fe-17e086ea6509) ![Snipaste_2023-12-18_18-15-59](https://github.com/007revad/Synology_HDD_db/assets/6359418/ec580037-23b8-434f-849b-278d3c811707)

kerem commented

2026-03-12 16:54:05 +03:00

Author

Owner

@WanpengQian commented on GitHub (Dec 18, 2023):

After I manual update HDD db from UI, it can create pool Now.
Thanks!!!

@WanpengQian commented on GitHub (Dec 18, 2023): After I manual update HDD db from UI, it can create pool Now. Thanks!!!